AMBIENCE
AMBIENCE

AMBIENCE

Trạng thái: Hàng có sẵn
The AMBIENCE loudspeakers feature a unique design with a high quality finishing and a superior sound performance. AMBIENCE is the ideal system to provide an exquisite and powerful sound to a wide range of movable and fixed installation applications such a
Giá: Liên hệ
Số lượng:  
Zalo Viber Yahoo Email
Để được tư vấn cụ thể quý khách vui lòng gọi:

The AMBIENCE loudspeaker series includes four models, the COL4.3, COL8.3 and COL16.3 columns and the SUB210S subwoofer.
All AMBIENCE loudspeaker cabinets are made of MDF wood to improve its sound performance. MDF cabinets are very common on high fidelity loudspeakers as it helps to improve its rigidity and avoid undesired vibrations. On professional audio instead it’s not so common due to its increased weight.

 


Ambience

 

COL

The COL4.3, COL8.3 and COL16.3 columns are composed of four, eight and sixteen 3” full range neodymium drivers respectively. One of the major benefits of the COL speakers is the narrow vertical angle of its sound beam. This feature is very helpful to reduce undesired ceiling reflections and have a better distribution of the sound pressure. Additionally, on the COL8.3 and COL16.3, different vertical aperture angles of the sound beam can be selected by means of a slide switch (10°-20° for the COL8.3 and 15°-25° for the COL16.3), allowing to precisely focus the sound on the audience. For the COL4.3 the vertical aperture angle is fixed to 20°.
The COL speakers provide a crystal clear and free of distortion mid and high frequencies, particularly appropriate for vocals sound reproduction.

SUB210S

The SUB210S is composed of two 10” drivers and comes in a small cabinet form factor. It features a symmetrical position of the drivers and reflex ports placed on the bottom side of the cabinet. This innovative design cancels any cabinet vibration and distortion, translating to an exceptionally clean, deep, natural and punchy bass.


CURVES

Curves of COL4.3、 COL8.3、 SUB210S:

COL4.3-CURVES COL8.3-CURVES
SUB210S-CURVES COL8.3+SUB210S-CURVES

Installation

The flexible installation method of the column can be adapted to various occasions, then you can enjoy the best sound in any environment.

 

 

AMBIENCE- INSTALLATION

COL4.3
COL4.3_DrawingCOL8.3
COL8.3_DrawingCOL16.3
col16.3_DrawingSUB210S
sub210s_Drawing

Model COL4.3 COL8.3 COL16.3 SUB210S
Power Capacity 120W AES/240W Program/480W Peak 240W AES/480W Program/960W Peak 480W AES/960W Program/1920W Peak 800W AES/1600W Program/3200W Peak
Nominal Impedance
Frequency Response(-6dB) 170Hz-13.5kHz 180Hz-16kHz Switch 10°
180Hz-13kHz Switch 20°
180Hz-13kHz Switch 20°
180Hz-14kHz Switch 30°
38Hz-500Hz
Sensitivity 99dB 1W/1m 101dB 1W/1m 103dB 1W/1m 96dB 1W/1m
Maximum SPL(calculated) 120dB Continuous,123dB Program,126dB Peak 125dB Continuous,128dB Program,131dB Peak 131dB Continuous,134dB Program,137dB Peak 130dB Continuous,133dB Program,136dB Peak
Horizontal directvity(-6dB) 120°±30°800Hz-5kHz,60°±10° 6kHz-16kHz 120°±30°800Hz-5kHz,50°±15° 6kHz-16Hz 120°±30°800Hz-5kHz,50°±15° 6kHz-16Hz Omni directional in the usable range
Vertical directivity(-6dB) 20°±5° 2.5kHz-8kHz, 40°±25° 1kHz-13.5kHz 10°±5° 2kHz-16kHz
20°±5° 1.3kHz-16kHz
20°±5° 600Hz-10kHz
30°±5° 400Hz-15kHz
Omni directional in the usable range
Recommended low cut filter Butterworth 12dB/oct 160Hz Butterworth 12dB/oct 160Hz Butterworth 12dB/oct 160Hz Butterworth 24dB/oct 25Hz
Connectors Euroblock(phoenix connector)42A rated with locking screws Euroblock(phoenix connector)42A rated with locking screws Euroblock(phoenix connector)42A rated with locking screws Euroblock(phoenix connector)42A rated with locking screws
Cabinet CNC made 12mm MDF CNC made 12mm MDF CNC made 12mm MDF CNC made 18mm MDF
Finish Satin painted Satin painted Satin painted Satin painted
Dimrensions(WxHxD) 114X400X119mm 114X720X119mm 114X1400X120mm 450X550X450mm
Mounting Flying: 2*M6 insertion points on top and rear for eye bolts
Wall: 4*M5 insertion points on rear face for swivel-tilting wall/pole bracket
2*M6 insertion points on top and bottom for “U” bracket
Pole: 2*M4 insertion points on bottom face for pole adaptor
Flying: 2*M6 insertion points on top and rear for eye bolts
Wall: 4*M5 insertion points on rear face for swivel-tilting wall/pole bracket
2*M6 insertion points on top and bottom for “U” bracket
Pole: 2*M4 insertion points on bottom face for pole adaptor
Flying: 2 M6 insertion points on top and rear for eye bolts
Wall: 4 M5 insertion points on rear face for swivel-tilting wall / pole
2 M6 insertion points on top and bottom for “U” bracket
Pole: 2 M6 insertion points on bottom face for pole adaptor
M20 threaded insert on top for pole assembly
Weight 3kg 5kg 10.6kg 36kg

 

Sản phẩm cùng loại